Chassis Foot Removal - NEC PowerMate Professional 9000E Series Service Manual

Chassis Foot Removal

Remove the chassis feet as follows.
1. Remove the left cover as previously described (see "Removing the Side
Covers").
2. Label and disconnect any cables connected to expansion boards.
3. Remove all expansion boards (see "Expansion Board Removal").
4. Remove the screws securing the feet to the chassis.
5. Remove the feet from under the chassis.
Replace the feet before reassembling or using the system.
Before using the system, turn the feet perpendicular to the
length of the system unit. The feet are designed to keep the
unit from being tipped over.
!
WARNING
Disassembly and Reassembly 3-29