1/2-Inch Internal Hard Drive Removal; Locating 5 1/4-Inch Accessible Device Cage Screws; Removing Internal Hard Drive Screws - NEC PowerMate Professional 9000E Series Service Manual

Locating 5 1/4-Inch Accessible Device Cage Screws

5. Slide the 5 1/4-inch accessible device cage out of the chassis.

3 1/2-Inch Internal Hard Drive Removal

Your system supports two internal hard drives in the drive cage within the
chassis. You can upgrade the system by replacing an existing hard drive, or by
adding an additional hard drive.
Remove a 3 1/2-inch internal hard drive by following these steps:
1. Follow all the instructions for removing the drive cage from the chassis (see
"Removing the Drive Cage").
2. Remove the four screws securing the drive to the drive cage and remove the
drive from the drive cage.
3-14 Disassembly and Reassembly

Removing Internal Hard Drive Screws