Stand; Locating The Feet Under The System Unit - NEC PowerMate Professional 9000E Series Service Manual

The inside of the system has the following features:
T
system board with connectors for the Pentium II processor single edge
contact (S.E.C.) cartridges, DIMM memory, IDE devices, diskette drives,
five expansion boards, a LAN connector, internal signal and power, and
external devices
T
graphics board (a built-to-order component)
T
sound board
T
three accessible 5 1/4-inch bays for expansion
T
one accessible 3 1/2-inch diskette drive bay (contains 1.44-MB diskette
drive)
T
a drive cage with bays for four 1-inch high or three 1.6-inch high, 3 1/2-
inch internal devices
T
260-watt power supply.
For more information on the above features, see "Components" in this section.

Stand

The system unit sits on a footed, non-removable stand to prevent it from being
tipped over. This is a safety feature to prevent personal injury and equipment
damage. Keep the feet of the stand turned out, perpendicular to the system unit.
Keep the feet perpendicular to the length of the system unit.
The feet are designed to keep the unit from being tipped
over.
1-8 System Overview
WARNING

Locating the Feet under the System Unit