Advanced Menu; Pci Configuration Submenus - NEC PowerMate Professional 9000E Series Service Manual

Advanced Menu

Use the Advanced menu and its submenus for setting the advanced features
available on your system.
Feature
Plug and Play OS
Reset
Configuration Data
PCI Configuration
Integrated
Peripherals
Configuration
Advanced Chipset
Control
Use
Multiprocessor
Specification
Large Disk Access
Mode
Delay on Option
ROMs
Feature
PCI Device,
Embedded SCSI
Devices
Option ROM Scan
Enable Master
Latency Timer
2-12 System Configuration

Advanced Menu

Choices Description
No Select Yes if you are booting a Plug and Play
Yes capable operating system.
Select No if you want the BIOS to configure
non-boot devices.
No Select Yes if you want to clear the system
Yes configuration data during next boot. System
automatically resets to No in next boot.
Press Enter See the table "PCI Configuration Submenu."
Press Enter See the table "Integrated Peripherals
Configuration Submenu."
Press Enter See Advanced Chipset Control Submenu."
1.1 Selects the version of multiprocessor
1.4 specification to use. Some operating systems
require version 1.1.
LBA Select LBA for IDE drives.
CHS
Disabled Forces a short delay at the end of each Option
Enabled ROM scan.

PCI Configuration Submenus

Choices Description
Press Enter N/A
Enabled Enables option ROM scan of the selected
Disabled device.
Enabled Enabled selects the device as a PCI bus
Disabled master.
Default Minimum guaranteed time, in units of PCI bus
0020h clocks, that a device may be master on a PCI
0040h bus.
0060h
0080h
00A0h
00C0h
00E0h