Table of Contents
Advertisement
After the drive has been reformatted, the Installing Applications screen
appears, indicating the status of the restore process as the operating system
loads from the CD. This screen also displays the version of Windows OS
being installed.
The drivers and other software components required for the operating
system are also loaded from the CD.
After the OS finishes loading, the "Operating System Restore Completed"
screen appears. Skip to step 8.
7. To partition the hard drive, click
Drive screen. The FAT16 Partition warning appears indicating that the
system is about to partition and format your hard drive using the FDISK
program. This warning screen contains three options: Back, Exit, and
Continue.
T
Click
T
Click
T
Click
If you click Continue, the system performs FDISK and reboots the system.
After the reboot, all partitions are formatted. When all the partitions have
been formatted, the OS loads from the CD. The Installing Applications
screen appears. This screen displays the version of Windows OS being
installed.
The drivers and other software components required for the operating
system are also loaded from the CD.
After the OS finishes loading, the "Operating System Restore Completed"
screen appears.
8. Remove the CD from the CD tray.
9. Click
OK
This completes the Custom Rebuild and Restore procedure.
To reinstall any of the applications or online documents, or to install device
drivers that did not come with your computer, follow the procedures in "NEC
Select Install CD."
Restore any application or driver that was not provided by NEC by using the
vendor diskette(s) or CD-ROM(s) included in its original packaging.
2-28 System Configuration
Back
to return to the Partition Information screen.
to terminate the restore process.
Exit
to perform FDISK.
Continue
to reboot.
on the Partitioning the Hard
Continue
Advertisement
Table of Contents
