Table of Contents
Advertisement
Running the Symbios Configuration Utility
Use the following steps to run the Symbios Configuration Utility.
1. Power on the system. The system boots up.
2. This message appears on the video monitor:
Press Ctrl-C to start the Symbios Configuration Utility
Press
Ctrl+C
The utility starts and the Main Menu displays.
Adapter
SYM53C875
SYM53C875
Change Adapter Status - Press Enter twice to change adapter Next Boot Status.
Adapter Boot Order - Press Enter to select and change boot order of each SCSI adapter.
Additional Adapter Configuration - Not used.
Display Mode=Verbose - Press Enter to change display mode.
Mono/Color - Press Enter to change display from black/white to color.
Language - Not used.
Help/Quit
* Next Boot Status for this controller must be turned OFF if you install the optional AMI MegaRAID
EXPRESS(r) 762 Controller board in your system. See "Change Adapter Status" above.
The following keys are active for all SCSI Configuration screens:
Key
Arrows
Enter
ESC
2-20 System Configuration
to run this utility.
Symbios Configuration Utility Main Menu
Port
Number
IRQ Level
F800
11
F400
10
Symbios SCSI Configuration Keys
Action
Up and down arrows move from one parameter to another within a
screen.
Displays options for a configurable parameter. Selects an option.
Moves back to previous screen or parameter or EXIT if at the Main
menu.
Status
Current
Next Boot*
On
On*
On
On
NVRAM
Found
Yes
Yes
Advertisement
Table of Contents
