Table of Contents
Advertisement
Removing the Drive Cage
Remove the drive cage by following these steps:
1. Remove the left cover of the system unit (see "Removing the Side Covers").
2. Label and disconnect all cables connected to devices in the drive cage.
3. Remove the three screws securing the drive cage to the rear of the chassis.
A - Drive Cage Screws B - Drive Cage
4. Large hooked tabs hold the left rear edge of the drive cage to the left rear
edge of the chassis. Swing the drive cage out of the chassis using the tabs
like a hinge.
A - Drive Cage
Locating Drive Cage Screws
Removing the Drive Cage
Disassembly and Reassembly 3-15
Advertisement
Table of Contents
