Nec Configuration Change Notification; Nec Auto Backup Utility - NEC POWERMATE 2000 - 01-2000 Manual

6. Edit the properties.
Click to return to the Network screen.
7. OK
8. Click Close

NEC Configuration Change Notification

NEC Configuration Change Notification is an application that runs as
Windows starts. It works with the LANDesk application and DMI
(Desktop Management Interface) software to determine if there has been a
change in the processor, main memory, or hard drive since the last startup.
A message appears on the screen when a change is detected.
Install NEC Configuration Change Notification from the NEC
Application and Driver CD. For installation information, see "Installing
ToolTelligent Utilities."

NEC Auto Backup Utility

The NEC Auto Backup utility works with LANDesk Client Manager and
Cheyenne Backup to detect predicted hard drive failures and to
automatically back up the data from the failing drive. The utility only
works with SMART hard drives and it requires both LANDesk Client
Manager and Cheyenne Backup to function.
The Auto Backup utility runs from the Startup group on the Windows
Start menu. The utility has some configuration options that are accessible
through the system tray icon. The NEC Tools group on the Start menu
includes a ReadMe file containing recent information about the utility as
well as access to a Help document.
Cheyenne Backup configuration determines the exact nature of the
backup that will be performed automatically. See the online Help for
Cheyenne Backup Configuration for information about available options.
Install the NEC Auto Backup Utility from the NEC Application and
Driver CD. For installation information, see "Installing ToolTelligent
Utilities."
4-20 Managing System Resources
to return to the Windows screen.