User Aware Login Example - ZyXEL Communications NXC5200 User Manual

Chapter 24 User/Group

24.4.2 User Aware Login Example

Access users cannot use the Web Configurator to browse the configuration of the
NXC. Instead, after access users log into the NXC, the following screen appears.
Figure 171 User Aware Login
The following table describes the labels in this screen.
Table 139 User Aware Login
LABEL
User-defined
lease time
(max ...
minutes)
Renew
Updating lease
time
automatically
Remaining
time before
lease timeout
Remaining
time before
auth. timeout
386
DESCRIPTION
Access users can specify a lease time shorter than or equal to the one
that you specified. The default value is the lease time that you specified.
Access users can click this button to reset the lease time, the amount of
time remaining before the NXC automatically logs them out. The NXC
sets this amount of time according to the
• User-defined lease time field in this screen
• Lease time field in the User Add/Edit screen
• Lease time field in the Setting screen
This box appears if you checked the Allow renewing lease time
automatically box in the Setting screen. Access users can select this
check box to reset the lease time automatically 30 seconds before it
expires. Otherwise, access users have to click the Renew button to
reset the lease time.
This field displays the amount of lease time that remains, though the
user might be able to reset it.
This field displays the amount of time that remains before the NXC
automatically logs the access user out, regardless of the lease time.
NXC5200 User's Guide