ZyXEL Communications NXC5200 User Manual page 495

A window displays prompting you to store the host key in you computer. Click Yes
3
to continue.
Figure 229 SSH Example 1: Store Host Key
Enter the password to log in to the NXC. The CLI screen displays next.
33.7.5.2 Example 2: Linux
This section describes how to access the NXC using the OpenSSH client program
that comes with most Linux distributions.
Test whether the SSH service is available on the NXC.
1
Enter "telnet 192.168.1.1 22" at a terminal prompt and press [ENTER]. The
computer attempts to connect to port 22 on the NXC (using the default IP
address of 192.168.1.1).
A message displays indicating the SSH protocol version supported by the NXC.
Figure 230 SSH Example 2: Test
$ telnet 192.168.1.1 22
Trying 192.168.1.1...
Connected to 192.168.1.1.
Escape character is '^]'.
SSH-1.5-1.0.0
NXC5200 User's Guide
Chapter 33 System
495