ZyXEL Communications NXC5200 User Manual page 537

Table 204 Maintenance > Diagnostics > Wireless Frame Capture > Capture
LABEL
File Size
File Prefix
Capture
Stop
Reset
NXC5200 User's Guide
DESCRIPTION
Specify a maximum size limit in kilobytes for the total combined
size of all the capture files on the NXC, including any existing
capture files and any new capture files you generate.
Note: If you have existing capture files you may need to set
this size larger or delete existing capture files.
The valid range is 1 to 50000. The NXC stops the capture and
generates the capture file when either the file reaches this size or
the time period specified in the Duration field expires.
Specify text to add to the front of the file name in order to help you
identify frame capture files.
You can modify the prefix to also create new frame capture files
each time you perform a frame capture operation. Doing this does
no overwrite existing frame capture files.
The file format is: [file prefix].dump. For example, "monitor.dump".
Click this button to have the NXC capture frames according to the
settings configured in this screen.
You can configure the NXC while a frame capture is in progress
although you cannot modify the frame capture settings.
The NXC's throughput or performance may be affected while a
frame capture is in progress.
After the NXC finishes the capture it saves a combined capture file
for all APs. The total number of frame capture files that you can
save depends on the file sizes and the available flash storage
space. Once the flash storage space is full, adding more frame
captures will fail.
Click this button to stop a currently running frame capture and
generate a combined capture file for all APs.
Click this button to return the screen to its last-saved settings.
Chapter 36 Diagnostics
537