ZyXEL Communications NXC5200 User Manual page 179

Figure 74 Configuration > Network > Interface > Ethernet
Each field is described in the following table.
Table 62 Configuration > Network > Interface > Ethernet
LABEL
Edit
Activate
Inactivate
Object References Select an entry and click Object References to open a screen that
#
Status
Name
IP Address
Mask
PVID
Apply
Reset
NXC5200 User's Guide
DESCRIPTION
Double-click an entry or select it and click Edit to open a screen
where you can modify the entry's settings.
To turn on an interface, select it and click Activate.
To turn off an interface, select it and click Inactivate.
shows which settings use the entry.
This field is a sequential value, and it is not associated with any
interface.
This icon is lit when the entry is active and dimmed when the entry is
inactive.
This field displays the name of the interface.
This field displays the current IP address of the interface. If the IP
address is 0.0.0.0, the interface does not have an IP address yet.
This screen also shows whether the IP address is a static IP address
(STATIC) or dynamically assigned (DHCP). IP addresses are always
static in virtual interfaces.
This field displays the interface's subnet mask in dot decimal notation.
This field indicates the interface's PVID.
Click Apply to save your changes back to the NXC.
Click Reset to return the screen to its last-saved settings.
Chapter 11 Interfaces
179