ZyXEL Communications NXC5200 User Manual page 123

Table 31 Monitor > System Status > Traffic Statistics (continued)
LABEL
Flush Data
#
IP Address/
User
Direction
Amount
#
Service/Port
Protocol
Direction
Amount
#
NXC5200 User's Guide
DESCRIPTION
Click this button to discard all of the screen's statistics and update the
report display.
These fields are available when the Traffic Type is Host IP Address/
User.
This field is the rank of each record. The IP addresses and users are
sorted by the amount of traffic.
This field displays the IP address or user in this record. The maximum
number of IP addresses or users in this report is indicated in
page 124.
This field indicates whether the IP address or user is sending or receiving
traffic.
Ingress- traffic is coming from the IP address or user to the NXC.
Egress - traffic is going from the NXC to the IP address or user.
This field displays how much traffic was sent or received from the
indicated IP address or user. If the Direction is Ingress, a red bar is
displayed; if the Direction is Egress, a blue bar is displayed. The unit of
measure is bytes, Kbytes, Mbytes or Gbytes, depending on the amount
of traffic for the particular IP address or user. The count starts over at
zero if the number of bytes passes the byte count limit. See
page 124.
These fields are available when the Traffic Type is Service/Port.
This field is the rank of each record. The protocols and service ports are
sorted by the amount of traffic.
This field displays the service and port in this record. The maximum
number of services and service ports in this report is indicated in
32 on page 124.
This field indicates what protocol the service was using.
This field indicates whether the indicated protocol or service port is
sending or receiving traffic.
Ingress - traffic is coming into the router through the interface
Egress - traffic is going out from the router through the interface
This field displays how much traffic was sent or received from the
indicated service / port. If the Direction is Ingress, a red bar is
displayed; if the Direction is Egress, a blue bar is displayed. The unit of
measure is bytes, Kbytes, Mbytes, Gbytes, or Tbytes, depending on the
amount of traffic for the particular protocol or service port. The count
starts over at zero if the number of bytes passes the byte count limit.
See Table 32 on page 124.
These fields are available when the Traffic Type is Web Site Hits.
This field is the rank of each record. The domain names are sorted by
the number of hits.
Chapter 7 Monitor
Table 32 on
Table 32 on
Table
123