ZyXEL Communications NXC5200 User Manual page 597

Table 227 NAT Logs
LOG MESSAGE
The NAT range is full
%s FTP ALG has
succeeded.
Extra signal port of
FTP ALG has been
modified.
Signal port of FTP ALG
has been modified.
%s H.323 ALG has
succeeded.
Extra signal port of
H.323 ALG has been
modified.
Signal port of H.323
ALG has been modified.
%s SIP ALG has
succeeded.
Extra signal port of
SIP ALG has been
modified.
Signal port of SIP ALG
has been modified.
Register SIP ALG extra
port=%d failed.
Register SIP ALG
signal port=%d failed.
Register H.323 ALG
extra port=%d failed.
Register H.323 ALG
signal port=%d failed.
Register FTP ALG extra
port=%d failed.
Register FTP ALG
signal port=%d failed.
NXC5200 User's Guide
DESCRIPTION
The NAT mapping table is full.
The FTP Application Layer Gateway (ALG) has been turned on
or off.
%s: Enable or Disable
Extra FTP ALG port has been changed.
Default FTP ALG port has been changed.
The H.323 ALG has been turned on or off. %s: Enable or
Disable
Extra H.323 ALG port has been changed.
Default H.323 ALG port has been changed.
The SIP ALG has been turned on or off. %s: Enable or Disable
Extra SIP ALG port has been changed.
Default SIP ALG port has been changed.
SIP ALG apply additional signal port failed.
%d: Port number
SIP ALG apply signal port failed.
%d: Port number
H323 ALG apply additional signal port failed.
%d: Port number
H323 ALG apply signal port failed.
%d: Port number
FTP ALG apply additional signal port failed.
%d: Port number
FTP ALG apply signal port failed.
%d: Port number
Appendix A Log Descriptions
597