ZyXEL Communications NXC5200 User Manual page 244

Chapter 17 Captive Portal
Table 86 Configuration > Captive Portal > Auth. Policy Add/Edit
LABEL
SSID Profile
Source
Address
Destination
Address
Schedule
Authentication
Force User
Authentication
OK
Cancel
244
DESCRIPTION
Select an SSID profile from the list. If none are available, you can create
a new one using the Create New Object button.
Select an address object from the list. If none are available, you can
create a new one using the Create New Object button.
The source address is an IP address for which the captive portal
intercepts all network traffic.
Select an address object from the list. If none are available, you can
create a new one using the Create New Object button.
The destination address is an IP address for which the captive portal
intercepts all network traffic toward.
Select a schedule from the list. If none are available, you can create one
in Configuration > Object > Schedule.
Select whether authentication is required or not necessary for this rule.
Select this option to redirect HTTP traffic to the login screen if the user
has not logged in yet.
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving.
NXC5200 User's Guide