ZyXEL Communications NXC5200 User Manual page 592

Appendix A Log Descriptions
Table 224 System Logs (continued)
LOG MESSAGE
DHCP request received
via interface
%s (%s:%s), src_mac:
%s with requested IP:
%s
IP confliction is
detected. Send back
DHCP-NAK.
Clear ARP cache done
Set manual time has
succeeded. Current
time is %s
NTP update successful,
current time is %s
NTP update failed
Device is rebooted by
administrator!
Insufficient memory.
Update the profile %s
has failed because of
strange server
response.
Update the profile %s
has succeeded because
the IP address of FQDN
%s was not changed.
Update the profile %s
has succeeded.
Collect Diagnostic
Information has failed
- Server did not
respond.
Collect Diagnostic
Infomation has
succeeded.
Port %d is up!!
Port %d is down!!
Table 225 Connectivity Check Logs
LOG MESSAGE
Can't open link_up2
Can not open %s.pid
592
DESCRIPTION
The device received a DHCP request through the specified
interface.
IP conflict was detected. Send back DHCP-NAK.
Clear ARP cache done.
The device date and time was changed manually.
%s is the date and time.
The device successfully synchronized with a NTP time server .
%s is the date and time.
The device was not able to synchronize with the NTP time
server successfully.
An administrator restarted the device.
Cannot allocate system memory.
Update profile failed because the response was strange, %s is
the profile name.
Update profile succeeded, because the IP address of profile is
unchanged, %s is the profile name.
Update profile succeeded, %s is the profile name.
There was an error and the diagnostics were not completed.
The diagnostics scripts were executed successfully.
The specified port has it's link up.
The specified port has it's link down.
DESCRIPTION
Cannot recover routing status which is link-down.
Cannot open connectivity check process ID file.
%s: interface name
NXC5200 User's Guide