ZyXEL Communications NXC5200 User Manual page 526

Chapter 35 File Manager
Note: The Web Configurator is the recommended method for uploading firmware. You
only need to use the command line interface if you need to recover the
firmware. See the CLI Reference Guide for how to determine if you need to
recover the firmware and how to recover it.
Find the firmware package at www.zyxel.com in a file that (usually) uses the
system model name with a .bin extension, for example, "nxc.bin".
The NXC's firmware package cannot go through the NXC when you enable the
anti-virus Destroy compressed files that could not be decompressed option.
The NXC classifies the firmware package as not being able to be decompressed
and deletes it. You can upload the firmware package to the NXC with the option
enabled, so you only need to clear the Destroy compressed files that could
not be decompressed option while you download the firmware package.
The firmware update can take up to five minutes. Do not turn off or
reset the NXC while the firmware update is in progress!
Figure 244 Maintenance > File Manager > Firmware Package
The following table describes the labels in this screen.
Table 199 Maintenance > File Manager > Firmware Package
LABEL
Boot
Module
Current
Version
Released
Date
File Path
Browse... Click Browse... to find the .bin file you want to upload. Remember that you
Upload
526
DESCRIPTION
This is the version of the boot module that is currently on the NXC.
This is the firmware version and the date created.
This is the date that the version of the firmware was created.
Type in the location of the file you want to upload in this field or click Browse
... to find it.
must decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two
minutes.
NXC5200 User's Guide