ZyXEL Communications NXC5200 User Manual page 554

Chapter 39 Troubleshooting
I uploaded a logo to use as the screen or window background but it does not
display properly.
Make sure the logo file is a GIF, JPG, or PNG of 100 kilobytes or less.
The NXC's traffic throughput rate decreased after I started collecting traffic
statistics.
Data collection may decrease the NXC's traffic throughput rate.
I can only see newer logs. Older logs are missing.
When a log reaches the maximum number of log messages, new log messages
automatically overwrite existing log messages, starting with the oldest existing log
message first.
The commands in my configuration file or shell script are not working properly.
• In a configuration file or shell script, use "#" or "!" as the first character of a
command line to have the NXC treat the line as a comment.
• Your configuration files or shell scripts can use "exit" or a command line
consisting of a single "!" to have the NXC exit sub command mode.
• Include write commands in your scripts. Otherwise the changes will be lost
when the NXC restarts. You could use multiple write commands in a long script.
Note: "exit" or "!'" must follow sub commands if it is to make the NXC exit sub
command mode.
I cannot get the firmware uploaded using the commands.
The Web Configurator is the recommended method for uploading firmware. You
only need to use the command line interface if you need to recover the firmware.
See the CLI Reference Guide for how to determine if you need to recover the
firmware and how to recover it.
554
NXC5200 User's Guide