ZyXEL Communications NXC5200 User Manual page 52

Chapter 3 The Web Configurator
3.3.5.2 Console
The Console allows you to use CLI commands from directly within the Web
Configurator rather than having to use a separate terminal program. In addition to
logging in directly to the NXC's CLI, you can also log into other devices on the
network through this Console. It uses SSH to establish a connection.
Note: To view the fuctions in the Web Configurator user interface that correspond
directly to specific NXC CLI commands, use the CLI Messages window (see
Section 3.3.5.1 on page
Figure 16 Console
The following table describes the elements in this screen.
Table 9 Console
LABEL
Command Line
Device IP
Address
52
51) in tandem with this one.
DESCRIPTION
Enter commands for the device that you are currently logged into here.
If you are logged into the NXC, see the CLI Reference Guide for details
on using the command line to configure it.
This is the IP address of the device that you are currently logged into.
NXC5200 User's Guide