ZyXEL Communications NXC5200 User Manual page 200

Hide thumbs Also See for NXC5200:

Table of Contents

Chapter 12 Policy and Static Routes

IPPR follows the existing packet filtering facility of RAS in style and in

implementation.

Figure 81 Configuration > Network > Routing > Policy Route

The following table describes the labels in this screen.

Table 69 Configuration > Network > Routing > Policy Route

Direct Route

Click this button to display a greater or lesser number of configuration

This is a global setting for enabling or disabling bandwidth management

on the NXC. You must enable this setting to have individual policy routes

or application patrol policies apply bandwidth management.

This same setting also appears in the AppPatrol > General screen.

Enabling or disabling it in one screen also enables or disables it in the

other screen.

Select this to have the NXC forward packets that match a policy route

according to the policy route instead of sending the packets directly to a

connected network.

Click this to create a new entry. Select an entry and click Add to create a

new entry after the selected entry.

Double-click an entry or select it and click Edit to open a screen where

you can modify the entry's settings.

To remove an entry, select it and click Remove. The NXC confirms you

want to remove it before doing so.

To turn on an entry, select it and click Activate.

To turn off an entry, select it and click Inactivate.

To change a rule's position in the numbered list, select the rule and click

Move to display a field to type a number for where you want to put that

rule and press [ENTER] to move the rule to the number that you typed.

The ordering of your rules is important as they are applied in order of

their numbering.

This is the number of an individual policy route.

NXC5200 User's Guide

Troubleshooting

Nxc5200 - v2.20