Chapter 13 Zones
13.3 Add/Edit Zone
This screen allows you to add or edit a zone. To access this screen, go to the Zone
screen, and click the Add icon or an Edit icon.
Figure 88 Network > Zone > Add/Edit
The following table describes the labels in this screen.
Table 76 Network > Zone > Add/Edit
LABEL
Name
Block Intra-
zone Traffic
Member List
OK
Cancel
216
DESCRIPTION
Type the name used to refer to the zone. You may use 1-31
alphanumeric characters, underscores(
character cannot be a number. This value is case-sensitive.
Select this check box to block network traffic between members in the
zone.
Available lists the interfaces that do not belong to any zone. Select the
interfaces that you want to add to the zone you are editing, and click the
right arrow button to add them.
Member lists the interfaces that belong to the zone. Select any
interfaces that you want to remove from the zone, and click the left
arrow button to remove them.
Click OK to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving.
), or dashes (-), but the first
_
NXC5200 User's Guide