ZyXEL Communications NXC5200 User Manual page 191

Table 66 Configuration > Network > Interface > VLAN > Add/Edit (continued)
LABEL
Configure
Policy Route
Interface
Parameters
Egress
Bandwidth
Ingress
Bandwidth
MTU
DHCP Setting
DHCP
Relay Server 1 Enter the IP address of a DHCP server for the network.
Relay Server 2 This field is optional. Enter the IP address of another DHCP server for
IP Pool Start
Address
NXC5200 User's Guide
DESCRIPTION
Click Policy Route to go to the screen where you can manually
configure a policy route to associate traffic with this VLAN.
Enter the maximum amount of traffic, in kilobits per second, the NXC
can send through the interface to the network. Allowed values are 0 -
1048576.
This is reserved for future use.
Enter the maximum amount of traffic, in kilobits per second, the NXC
can receive from the network through the interface. Allowed values
are 0 - 1048576.
Maximum Transmission Unit. Type the maximum size of each data
packet, in bytes, that can move through this interface. If a larger
packet arrives, the NXC divides it into smaller fragments. Allowed
values are 576 - 1500. Usually, this value is 1500.
The DHCP settings are available for the OPT, LAN and DMZ interfaces.
Select what type of DHCP service the NXC provides to the network.
Choices are:
None - the NXC does not provide any DHCP services. There is already
a DHCP server on the network.
DHCP Relay - the NXC routes DHCP requests to one or more DHCP
servers you specify. The DHCP server(s) may be on another network.
DHCP Server - the NXC assigns IP addresses and provides subnet
mask, gateway, and DNS server information to the network. The NXC
is the DHCP server for the network.
These fields appear if the NXC is a DHCP Relay.
the network.
These fields appear if the NXC is a DHCP Server.
Enter the IP address from which the NXC begins allocating IP
addresses. If you want to assign a static IP address to a specific
computer, click Add Static DHCP.
If this field is blank, the Pool Size must also be blank. In this case,
the NXC can assign every IP address allowed by the interface's IP
address and subnet mask, except for the first address (network
address), last address (broadcast address) and the interface's IP
address.
Chapter 11 Interfaces
191