ZyXEL Communications NXC5200 User Manual page 601

Table 229 Interface Logs (continued)
LOG MESSAGE
Interface %s connect
failed: PAP
authentication
failed.
Interface %s connect
failed: Connect
timeout.
Interface %s create
failed because has no
member.
"Interface cellular
Application Error Code
%d\n.
"An error [%d]
occurred while
negotiating with the
device in %s. Please
try to remove then
insert the device.
"Unable to negotiate
with the device in %s.
Please try to remove
then insert the
device.
"Unable to configure
the selected frequency
band to the device in
%s. Please try to
remove then insert the
device.
"PIN code is required
for inteface
cellular%d. Please
check the PIN code
setting.
"SIM card has been
successfully unlocked
by PUK code on
interface cellular%d.
"Incorrect PUK code of
interface cellular%d.
Please check the PUK
code setting.
"SIM card of interface
cellular%d in %s is
damaged or not
inserted. Please
remove the device,
then check the SIM
card.
NXC5200 User's Guide
DESCRIPTION
PAP authentication failed (the server must support PAP and
verify verify that the authentication failed, this does not
include cases where the server does not support PAP). %s:
PPP interface name.
A PPPOE connection timed out due to a lack of response from
the PPPOE server. %s: PPP interface name.
A bridge interface has no member. %s: bridge interface
name.
The listed error code (%d) was generated due to an internal
cellular interface error.
The listed error code (%d) happened when the NXC
attempted to negotiate with the cellular device installed in (or
connected to) the listed slot (%s). Remove and reinstall the
device.
The NXC could not negotiate with the cellular device installed
in (or connected to) the listed slot (%s). Remove and reinstall
the device.
The NXC failed to set the cellular device installed in (or
connected to) the listed slot (%s) to use the frequency band
you configured. The cellular device may not support the band
or you may need to try removing and reinstalling the device.
The PIN code configured for the listed cellular interface (%d)
is incorrect or missing.
You entered the correct PUK code and unlocked the SIM card
for the cellular device associated with the listed cellular
interface (%d).
You entered an incorrect PUK code so you were not able to
unlock the SIM card for the cellular device associated with the
listed cellular interface (%d).
The SIM card for the cellular device associated with the listed
cellular interface (%d) cannot be detected. The SIM card may
be missing, not inserted properly, or damaged. Remove the
device and check its SIM card. If it does not appear to be
damaged, try re-inserting the SIM card.
Appendix A Log Descriptions
601