ZyXEL Communications NXC5200 User Manual page 603

Table 230 WLAN Logs
LOG MESSAGE
Wlan %s is enabled.
Wlan %s is disabled.
Wlan %s has been
configured.
Interface %s has been
configured.
Interface %s has been
deleted.
Create interface %s
has failed. Wlan
device does not exist.
System internal error.
No 802.1X or WPA
enabled!
System internal error.
Error configuring WPA
state!
System internal error.
Error enabling WPA/
802.1X!
Station has
associated. Interface:
%s, MAC: %s.
WPA or WPA2 enterprise
EAP timeout.
Interface: %s, MAC:
%s.
Station association
has failed. Maximum
associations have
reached the maximum
number. Interface: %s,
MAC: %s.
WPA authentication has
failed. Interface: %s,
MAC: %s.
Incorrect password for
WPA or WPA2 enterprise
internal
authentication.
Interface: %s, MAC:
%s.
NXC5200 User's Guide
DESCRIPTION
The WLAN (IEEE 802.11 b and or g) feature has been turned
on. %s is the slot number where the WLAN card is or can be
installed.
The WLAN (IEEE 802.11 b and or g) feature has been turned
off. %s is the slot number where the WLAN card is or can be
installed.
The WLAN (IEEE 802.11 b and or g) feature's configuration
has been changed. %s is the slot number where the WLAN
card is or can be installed.
The configuration of the specified WLAN interface (%s) has
been changed.
The specified WLAN interface (%s) has been removed.
The wireless device failed to create the specified WLAN
interface (%s). Remove the wireless device and reinstall it.
IEEE 802.1x or WPA is not enabled.
The NXC was not able to configure the wireless device to use
WPA. Remove the wireless device and reinstall it.
The NXC was not able to enable WPA/IEEE 802.1X.
A wireless client with the specified MAC address (second %s)
associated with the specified WLAN interface (first %s).
There was an EAP timeout for a wireless client connected to
the specified WLAN interface (first %s). The MAC address of
the wireless client is listed (second %s).
A wireless client with the specified MAC address (second %s)
failed to connect to the specified WLAN interface (first %s)
because the WLAN interface already has its maximum
number of wireless clients.
A wireless client used an incorrect WPA key and thus failed to
connect to the specified WLAN interface (first %s). The MAC
address of the wireless client is listed (second %s).
A wireless client used an incorrect WPA or WPA2 user
password and failed authentication by the NXC's local user
database while trying to connect to the specified WLAN
interface (first %s). The MAC address of the wireless client is
listed (second %s).
Appendix A Log Descriptions
603