ZyXEL Communications NXC5200 User Manual page 499

Table 188 Configuration > System > FTP (continued)
LABEL
Remove
Move
#
Zone
Address
Action
Apply
Reset
NXC5200 User's Guide
DESCRIPTION
To remove an entry, select it and click Remove. The NXC confirms you
want to remove it before doing so. Note that subsequent entries move up
by one when you take this action.
To change an entry's position in the numbered list, select the method and
click Move to display a field to type a number for where you want to put
it and press [ENTER] to move the rule to the number that you typed.
This the index number of the service control rule.
The entry with a hyphen (-) instead of a number is the NXC's (non-
configurable) default policy. The NXC applies this to traffic that does not
match any other configured rule. It is not an editable rule. To apply other
behavior, configure a rule that traffic will match so the NXC will not have
to use the default policy.
This is the zone on the NXC the user is allowed or denied to access.
This is the object name of the IP address(es) with which the computer is
allowed or denied to access.
This displays whether the computer with the IP address specified above
can access the NXC zone(s) configured in the Zone field (Accept) or not
(Deny).
Click Apply to save your changes back to the NXC.
Click Reset to return the screen to its last-saved settings.
Chapter 33 System
499