ZyXEL Communications NXC5200 User Manual page 282

Hide thumbs Also See for NXC5200:

Table of Contents

Chapter 19 Application Patrol

the bandwidth used by these other applications.This screen also allows you to add,

edit, and remove conditions to this default policy.

Click AppPatrol > Other to open the Other screen.

Figure 127 AppPatrol > Other

The following table describes the labels in this screen.

Table 103 AppPatrol > Other

Click this to create a new entry. Select an entry and click Add to create a

new entry after the selected entry.

Select an entry and click this to be able to modify it.

Select an entry and click this to delete it.

To turn on an entry, select it and click Activate.

To turn off an entry, select it and click Inactivate.

To change an entry's position in the numbered list, select it and click

Move to display a field to type a number for where you want to put that

entry and press [ENTER] to move the entry to the number that you

The activate (light bulb) icon is lit when the entry is active and dimmed

when the entry is inactive.

This field is a sequential value, and it is not associated with a specific

Note: The NXC checks conditions in the order they appear in the

list. While this sequence does not affect the functionality, you

might improve the performance of the NXC by putting more

common conditions at the top of the list.

This field displays the specific port number to which this policy applies.

This is the schedule that defines when the policy applies. any means the

policy always applies.

This is the user name or user group to which the policy applies. If any

displays, the policy applies to all users.

This is the source zone of the traffic to which this policy applies.

This is the destination zone of the traffic to which this policy applies.

NXC5200 User's Guide

Troubleshooting

Nxc5200 - v2.20