ZyXEL Communications NXC5200 User Manual page 383

Table 137 Configuration > Object > User/Group > Setting (continued)
LABEL
User Type
Lease Time
Reauthentication
Time
Miscellaneous Settings
Allow renewing lease
time automatically
Enable user idle
detection
User idle timeout
User Logon Settings
Limit the number of
simultaneous logons
for administration
account
NXC5200 User's Guide
DESCRIPTION
These are the kinds of user account the NXC supports.
• admin - this user can look at and change the configuration
of the NXC
• limited-admin - this user can look at the configuration of
the NXC but not to change it
• user - this user has access to the NXC's services but cannot
look at the configuration
• guest - this user has access to the NXC's services but
cannot look at the configuration
• ext-user - this user account is maintained in a remote
server, such as RADIUS or LDAP.
• ext-group-user - this user account is maintained in a
remote server, such as RADIUS or LDAP.
This is the default lease time in minutes for each type of user
account. It defines the number of minutes the user has to
renew the current session before the user is logged out.
Admin users renew the session every time the main screen
refreshes in the Web Configurator. Access users can renew the
session by clicking the Renew button on their screen. If you
allow access users to renew time automatically, the users can
select this check box on their screen as well. In this case, the
session is automatically renewed before the lease time expires.
This is the default reauthentication time in minutes for each
type of user account. It defines the number of minutes the
user can be logged into the NXC in one session before having
to log in again. Unlike Lease Time, the user has no
opportunity to renew the session without logging out.
Select this check box if access users can renew lease time
automatically, as well as manually, simply by selecting the
Updating lease time automatically check box on their
screen.
This is applicable for access users.
Select this check box if you want the NXC to monitor how long
each access user is logged in and idle (in other words, there is
no traffic for this access user). The NXC automatically logs out
the access user once the User idle timeout has been
reached.
This is applicable for access users.
This field is effective when Enable user idle detection is
checked. Type the number of minutes each access user can be
logged in and idle before the NXC automatically logs out the
access user.
Select this check box if you want to set a limit on the number
of simultaneous logins by admin users. If you do not select
this, admin users can login as many times as they want at the
same time using the same or different IP addresses.
Chapter 24 User/Group
383