ZyXEL Communications NXC5200 User Manual page 607

Table 236 IP-MAC Binding Logs
LOG MESSAGE
Cannot bind ip-mac from
dhcpd:
%s#%u.%u.%u.%u#%0
2X:%02X:%02X:%02X:
%02X:%02X.
Cannot remove ip-mac
binding from dhcpd:
%s#%u.%u.%u.%u#%0
2X:%02X:%02X:%02X:
%02X:%02X.
Table 237 CAPWAP Logs
LOG MESSAGE
WLAN Controller Start.
Registration Type:%s
WLAN Controller Reset.
WLAN Controller End.
Managed AP Connect.
MACAddr:%02x%02x%0
2x%02x%02x%02x,
Model:%s, Name:%s
Managed AP Disconnect.
MACAddr:%02x%02x%0
2x%02x%02x%02x,
Model:%s, Name:%s,
Reason:%s, State %s
Add a Managed AP.
MACAddr:%02x%02x%0
2x%02x%02x%02x,
Model:%s
Delete a Managed AP.
MACAddr:%02x%02x%0
2x%02x%02x%02x,
Model:%s
NXC5200 User's Guide
DESCRIPTION
The IP-MAC binding feature could not create an IP-MAC
binding hash table entry. The interface the packet came in
through, the sender's IP address and MAC address, are also
shown along with the binding type ("s" for static or "d" for
dynamic).
The IP-MAC binding feature could not delete an IP-MAC
binding hash table entry. The interface the packet came in
through, the sender's IP address and MAC address, are also
shown along with the binding type ("s" for static or "d" for
dynamic).
DESCRIPTION
Indicates that AP management services has started.
The AP management service has reset.
The AP management service has ended.
The specified Managed AP connected to the CAPWAP server.
1st %02x ~ 6th %02x: Managed AP MAC Address.
7th %s: Managed AP Model Name.
8th %s: Managed AP Description.
The specified Managed AP disconnected from the CAPWAP
server.
1st %02x ~ 6th %02x: Managed AP MAC Address.
7th %s: Managed AP Model Name.
8th %s: Managed AP Description.
9th %s: Managed AP Disconnect Reason.
10th %s: Managed AP State.
The specified AP from un-managed list was added to
managed list.
1st %02x ~ 6th %02x: Managed AP MAC Address.
7th %s: Managed AP Model Name.
The specified AP from managed list was deleted.
1st %02x ~ 6th %02x: Managed AP MAC Address.
7th %s: Managed AP Model Name.
Appendix A Log Descriptions
607