ZyXEL Communications NXC5200 User Manual page 106

Chapter 6 Dashboard
Table 22 Dashboard (continued)
LABEL
Memory Usage This field displays what percentage of the NXC's RAM is currently
Flash Usage
Active
Sessions
Top 5 Station
#
AP MAC
Max. Station
Count
Interface Status
Summary
Name
Status
HA Status
Zone
IP Address
106
DESCRIPTION
being used. Hover your cursor over this field to display the Show
Memory Usage icon that takes you to a chart of the NXC's recent
memory usage.
This field displays what percentage of the NXC's onboard flash
memory is currently being used.
This field displays how many traffic sessions are currently open on the
NXC. These are the sessions that are traversing the NXC. Hover your
cursor over this field to display icons. Click the Detail icon to go to
the Session Monitor screen to see details about the active sessions.
Click the Show Active Sessions icon to display a chart of NXC's
recent session usage.
Displays the top 5 Access Points (AP) with the highest number of
station (aka wireless client) connections.
This field displays the rank of the station.
This field displays the MAC address of the AP to which the station
belongs.
This field displays the maximum number of wireless clients that have
connected to this AP.
If an Ethernet interface does not have any physical ports associated
with it, its entry is displayed in light gray text. Click the Detail icon to
go to a (more detailed) summary screen of interface statistics.
This field displays the name of each interface.
This field displays the current status of each interface. The possible
values depend on what type of interface it is.
Inactive - The Ethernet interface is disabled.
Down - The Ethernet interface is enabled but not connected.
Speed / Duplex - The Ethernet interface is enabled and connected.
This field displays the port speed and duplex setting (Full or Half).
This field displays the status of the interface in the virtual router.
Active - This interface is the master interface in the virtual router.
Stand-By - This interface is a backup interface in the virtual router.
Fault - This VRRP group is not functioning in the virtual router right
now. For example, this might happen if the interface is down.
n/a - Device HA is not active on the interface.
This field displays the zone to which the interface is currently
assigned.
This field displays the current IP address assigned to the interface. If
the IP address is 0.0.0.0, the interface is disabled or did not receive
an IP address and subnet mask via DHCP.
If this interface is a member of an active virtual router, this field
displays the IP address it is currently using. This is either the static IP
address of the interface (if it is the master) or the management IP
address (if it is a backup).
NXC5200 User's Guide