ZyXEL Communications NXC5200 User Manual page 408

Hide thumbs Also See for NXC5200:

Table of Contents

Chapter 27 Addresses

• RANGE - a range address is defined by a Starting IP Address and an Ending

• SUBNET - a network address is defined by a Network IP address and

Netmask subnet mask.

The Address screen provides a summary of all addresses in the NXC. To access

this screen, click Configuration > Object > Address > Address. Click a

column's heading cell to sort the table entries by that column's criteria. Click the

heading cell again to reverse the sort order.

Figure 183 Configuration > Object > Address > Address Summary

The following table describes the labels in this screen.

Table 150 Configuration > Object > Address > Address Summary

Click this to create a new entry.

Double-click an entry or select it and click Edit to be able to modify the

entry's settings.

To remove an entry, select it and click Remove. The NXC confirms you

want to remove it before doing so.

Select an entry and click Object References to open a screen that

shows which settings use the entry.

This field is a sequential value, and it is not associated with a specific

This field displays the configured name of each address object.

This field displays the type of each address object. "INTERFACE" means

the object uses the settings of one of the NXC's interfaces.

This field displays the IP addresses represented by each address object.

If the object's settings are based on one of the NXC's interfaces, the

name of the interface displays first followed by the object's current

address settings.

NXC5200 User's Guide

Troubleshooting

Nxc5200 - v2.20