Figure 3-1 Web Management - "User Login" Page - ZyXEL Communications P-964 User Manual

P964 APR Cable Router with 802.11g Access Point
After you have finished the TCP/IP configuration setup, You may access the web pages by typing the web address
http://192.168.1.1:8080/"
The P964 APR cable router provides users to configure LAN settings including DHCP server IP, netmask, DHCP clients' start IP
address and the number of CPEs. To configure the LAN setting, users use a PC to browse the LAN IP of the cable router. The web
functions only open to the LAN, no access from HFC cable is allowed. When browsing started, the cable router prompts the
following windows for user to login.
After input username/password, click "OK" and the following page will be displayed.
There are four tags "Status", "Basic", "Advanced" and "wireless" as shown in in the web management interface of P964APR. The
"Status" tag will show the connection status and software information. "Basic" and "Advanced" tags are used for the configuration to
LAN interface.
1. "Status"
The "Status" tag will show the connection status, software information and event logs of your P964APR.
2. "Basic"
Click "Basic", users can set DHCP server IP, and net mask, etc.
3. "Advanced"
This function is designed especially for users who want more control of LAN interface. For example, users can block packet
from some CPEs to access the Internet. Users can also open some well known ports or some special port for accessing from the
Internet.
4. " "
Wireless
Users can configure the wireless access point by clicking the "wireless" tag. There are four groups of configuration setups in the
"Wireless" tag.
3-2
.
Figure 3-1 Web Management – "User Login" Page
Web Based Management
"