ZyXEL Communications NXC5200 User Manual page 371

Enable the bridge interface on the master NXC and then on the backup NXC.
3
Connect the NXCs.
4
Synchronization
During synchronization, the master NXC sends the following information to the
backup NXC.
• Startup configuration file (startup-config.conf)
• AV signatures
• IDP and application patrol signatures
• System protect signatures
• Certificates (My Certificates, and Trusted Certificates)
Synchronization does not change the device HA settings in the backup NXC.
Synchronization affects the entire device configuration. You can only configure one
set of settings for synchronization, regardless of how many VRRP groups you
might configure. The NXC uses Secure FTP (on a port number you can change) to
NXC5200 User's Guide
Br0 {ge4, ge5}
A
B
Br0 {ge4, ge5}
Br0 {ge4, ge5}
A
B
Br0 {ge4, ge5}
Chapter 23 Device HA
371