CENTURION SYSTEMS D2 Turbo Installation Manual page 82

Step 4: Return the Function Dial to
the RUN position.
Setting the Speed Profile to High or Low
To select the desired speed profile, either High (approximately 24m/min) or Low
(approximately 16m/min) please follow the steps below:
Step 1: Rotate the Function Dial to
the PROFILE position (E).
Step 2: Rotate the Setting Dial to
SPEED hi/lo along the 'E' row of
options.
Step 3: Press the pushbutton to
toggle Speed profile between High
and Low.
The Status LED will change from red
to green indicating that the High
Speed Profile has been activated,
or it will change to green indicating
that the Low Speed Profile has been
activated.
page 82
FIGURE 134
FIGURE 135
FIGURE 136
www.CentSys.com