CENTURION SYSTEMS D2 Turbo Installation Manual page 71

Step 4: Press the desired button on
the remote control(s) that you want
to activate the selected function.
The Status LED will flash twice
indicating that the onboard receiver
has learned in the remote control(s).
The onboard buzzer will also pulse
twice.
Step 5: Return the Function Dial to
the RUN position.
Deleting specific remote controls
To delete specific remote controls from the D2 Turbo's onboard receiver, please follow the
steps below:
Step 1: Rotate the Function Dial to
the REMOTES position (B).
Step 2: Rotate the Setting Dial
to DELETE Tx along the 'B' row of
options. This will delete specific
remote controls from the onboard
receiver's memory.
www.CentSys.com page 71
FIGURE 101
FIGURE 102
FIGURE 103