CENTURION SYSTEMS D2 Turbo Installation Manual page 74

Setting the Autoclose feature
The Autoclose feature can be selected to be either Off or Activated, with a pre-selected
time delay.
Activating the Autoclose feature
To activate the Autoclose, with a
pre-selected time delay, please
follow the steps below:
Step 1: Rotate the Function Dial to
the AUTOCLOSE position (C).
Step 2: Rotate the Setting Dial to
the desired time delay setting along
the 'C' row of options.
You can choose either 5 seconds,
10 seconds, 15 seconds, 30 seconds
or 45 seconds.
Step 3: Press the pushbutton to
select your choice.
The Status LED will change from
red to green indicating that the
Autoclose feature has been activated
with the delay time selected in
Step 2.
page 74
FIGURE 110
FIGURE 111
FIGURE 112
www.CentSys.com