CENTURION SYSTEMS D2 Turbo Installation Manual page 81

Step 4: Return the Function Dial to
the RUN position.
Setting the Operating Profiles
Three Operating Profiles, Positive Close Mode, Speed and Collision Sensitivity, can each
be configured depending on your individual requirements.
Positive Close Mode
To activate or deactivate Positive
Close Mode, please follow the steps
below:
Step 1: Rotate the Function Dial to
the PROFILE position (E).
Step 2: Rotate the Setting Dial
to PCM on/off along the 'E' row of
options.
Step 3: Press the pushbutton to
toggle the chosen mode between On
and Off.
The Status LED will change from
red to green indicating that the
selected Positive Close Mode has
been activated, or it will change
to red indicating that it has been
deactivated.
www.CentSys.com page 81
FIGURE 131
FIGURE 132
FIGURE 133