CENTURION SYSTEMS D2 Turbo Installation Manual page 75

Step 4: Return the Function Dial to
the RUN position.
Please note that if the operator is running Open Only Mode – the Autoclose
feature is activated with a 15 second delay as the default – this can be changed
if necessary.
Deactivating the Autoclose
feature
To deactivate the Autoclose feature,
please follow the steps below:
Step 1: Rotate the Function Dial to
the AUTOCLOSE position (C).
Step 2: Rotate the Setting Dial to
the OFF selection along the 'C' row
of options. The Status LED will be
red if Autoclose is on. If it is already
Off, the Status LED will be green.
Step 3: Press the pushbutton to
select.
The Status LED will change from
red to green indicating that
the Autoclose feature has been
deactivated or switched Off.
www.CentSys.com page 75
FIGURE 113
FIGURE 114
FIGURE 115