Related Manuals for CENTURION SYSTEMS D3 SMART
Summary of Contents for CENTURION SYSTEMS D3 SMART
- Page 1 SLIDING GATE OPERATORS D3 SMART / D5-EVO SMART / D6 SMART THEFT-DETERRENT CAGE INSTALLATION MANUAL Centurion Systems (Pty) Ltd www.centsys.com...
- Page 2 Saturdays 08h00 to 14h00 GMT+2 Centurion Systems (Pty) Ltd reserves the right to make changes to the product described in this manual without notice and without obligation to notify any persons of any such revisions or changes. Additionally, Centurion Systems (Pty) Ltd makes no representations or warranties with respect to this manual.
-
Page 3: Important Safety Information
• The installer must explain the operation of the D3 SMART / D5-EVO SMART / D6 SMART Theft-Deterrent Cage and any safety hazards to the end-user - refer to "Section 5 - Installation Handover"... -
Page 4: General Description
FIGURE 1. THEFT-DETERRENT CAGE The D3 SMART / D5-EVO SMART / D6 SMART Theft-Deterrent Cage is designed to significantly reduce the risk of an intruder gaining access to the operator. Disclaimer: Due to continuous improvement in the design and manufacture of this product, the actual product may differ slightly in appearance to that which is depicted herein. -
Page 5: Product Identification
SECTION 3 PRODUCT IDENTIFICATION 3. Product Identification FIGURE 2. PRODUCT IDENTIFICATION SMART Operator Theft-Deterrent Cage Overstrap Discus Padlock Front Bar Assembly page 5 www.centsys.com... - Page 6 SECTION 4 SMART OPERATOR THEFT-DETERRENT CAGE INSTALLATION 4. SMART Operator Theft-Deterrent Cage Installation Images may vary according to the SMART Operator. IMPORTANT! In the case where one has the optional magnet origin system fitted, relocate the gate magnet as close as possible to the operator cover and reset the gate limits.
-
Page 7: Installation Handover
FIGURE 7 5. Installation Handover Once the D3 SMART / D5-EVO SMART / D6 SMART Theft-Deterrent Cage has been successfully installed and its operation tested, it is important for the operation and safety considerations to be explained to the end-user of the system. - Page 8 The CENTURION and CENTSYS logos, all product and brand names in this document that are accompanied by the TM symbol are trademarks of Centurion Systems (Pty) Ltd, in South Africa and other territories; all rights are reserved. We invite you to contact us for further details.
Need help?
Do you have a question about the D3 SMART and is the answer not in the manual?
Questions and answers
How to scan Centurion D3 smart