Setting The Mode Of Operation - CENTURION SYSTEMS D2 Turbo Installation Manual

Step 4: Return the Function Dial to
the RUN position.

Setting the Mode of Operation

The D2 Turbo has three modes to choose from depending on the application. Only one
mode can be selected at any given time
Step 1: Rotate the Function Dial to
the AUTOCLOSE position (C).
Step 2: Rotate the Setting Dial to
the OFF selection along the 'C' row
of options. The Status LED will be
red if Autoclose is on. If it is already
Off, the Status LED will be green.
Step 3: Press the pushbutton to
select.
The Status LED will change from
red to green indicating that
the Autoclose feature has been
deactivated or switched Off.
page 76
FIGURE 116
FIGURE 117
FIGURE 118
www.CentSys.com