14. Customising the Features and Functions
Simplicity is the ultimate sophistication'. ~ Leonardo Da Vinci
The D2 Turbo and D2 Turbo Low-Voltage controllers make ordinarily complex settings
as quick and easy as possible. Using the Function and Setting Dials, the Select/Toggle
pushbutton, and the bi-colour (red and green) Status LED you can set up the many
features and functions in a flash.
Please always adjust the Function
Dial first.
Set this to the desired function,
and then move the Setting Dial
to the preferred setting.
If a setting is for a single fixed value,
for example, 15 second Autoclose
time, then the Select pushbutton
acts as a select for that single
choice.
However, if the setting has two
options, for example On/Off or Hi/
Lo, then the pushbutton acts as a
toggle between the two preferences.
www.CentSys.com
page 67
Function Dial
FIGURE 92
Setting Dial
FIGURE 93
FIGURE 94
Need help?
Do you have a question about the D2 Turbo and is the answer not in the manual?
Questions and answers