CENTURION SYSTEMS D2 Turbo Installation Manual page 78

Step 4: Return the Function Dial to
the RUN position.
Please note that PIRAC
Mode can be active in
addition to this mode if so
desired.
Reversing Mode
To activate Reversing Mode, please follow the steps below:
Step 1: Rotate the Function Dial to
the MODE position (D).
Step 2: Rotate the Setting Dial to
the REVERSING selection along the
'D' row of options.
Step 3: Press the pushbutton to
select the setting.
The Status LED will change from
red to green indicating that the
Reversing Operating Mode has been
activated.
page 78
FIGURE 122
FIGURE 123
FIGURE 124
www.CentSys.com