CENTURION SYSTEMS D2 Turbo Installation Manual page 72

Step 3: Press the pushbutton to
select – the Status LED will change
from red to green.
Step 4: Press any button on the
specific remote control(s) that you
want to delete from the onboard
receiver's memory. The Status LED
will flash green three times and the
buzzer will also beep three times
indicating that the onboard receiver
has deleted the remote control(s)
from its memory.
Step 5: Return the Function Dial to
the RUN position.
page 72
FIGURE 104
FIGURE 105
FIGURE 106
www.CentSys.com