Download Print this page

CENTURION SYSTEMS D2 Turbo Installation Manual page 63

Advertisement

PIRAC
With PIRAC Mode enabled, your gate
will close as soon as you have driven
through and passed the Safety
Beams – giving intruders no time to
follow behind you.
If Autoclose is enabled and the
gate has been opened but nothing
moves through the Closing Safety
Beam, the gate will stay fully open
for the duration of the Autoclose
timer before closing. However,
if something passes through the
Closing Beam the gate will close
immediately.
If something crosses the beam while
the gate is opening, the gate will
continue to open until the beam is
cleared. Once the beam is cleared,
the gate will stop and close. If the
gate has reached its fully open
position, it will stop and remain open
until the beam is cleared.
To enable/disable PIRAC Mode, please refer to the section,
'Customising the Features and Functions' on page 65.
www.CentSys.com
page 63
Gate
opening
Beam
FIGURE 86
Gate
opening
Beam
FIGURE 87
Gate
closing
Beam
FIGURE 88

Advertisement

loading
Need help?

Need help?

Do you have a question about the D2 Turbo and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

D2 turbo low-voltage