CENTURION SYSTEMS D2 Turbo Installation Manual page 77

Step 4: Return the Function Dial to
the RUN position.
Please note that PIRAC
Mode can be active in
addition to this mode if so
desired.
Open Only Mode
To activate Open Only Mode please follow these steps:
Step 1: Rotate the Function Dial to
the MODE position (D).
Step 2: Rotate the Setting Dial to
the OPEN ONLY selection along the
'D' row of options.
Step 3: Press the pushbutton to
select the setting.
The Status LED will change from
red to green indicating that the
Open Only Operating Mode has been
activated.
www.CentSys.com page 77
FIGURE 119
FIGURE 120
FIGURE 121