Network Modules - Cisco CISCO2650 - 2650 Router Hardware Installation Manual

Connecting Fast Ethernet-PRI Network Modules
This chapter describes how to connect Fast Ethernet-Integrated Services Digital Network (ISDN)
Primary Rate Interface (PRI) network modules and contains the following sections:
•
•
•
•
Unless specifically identified, references to Fast Ethernet-PRI network modules in this chapter
Note
include all these network modules.
To determine whether your router supports a specific network module, see
Tip
1-Port Fast Ethernet and 1- or 2-Port Channelized T1/ISDN PRI

Network Modules

This section provides information about the following network modules:
•
•
OL-2485-20
1-Port Fast Ethernet and 1- or 2-Port Channelized T1/ISDN PRI Network Modules, page 4-1
1-Port Fast Ethernet and 1- or 2-Port Channelized T1/ISDN PRI with CSU Network Modules, page
4-3
1-Port Fast Ethernet and 1- or 2-Port Channelized E1/ISDN PRI Balanced or Unbalanced
Network Modules, page 4-5
Fast Ethernet-PRI Module LEDs, page 4-11
1-port Fast Ethernet 1-port channelized T1/ISDN PRI network module (NM-1FE1CT1) (see
Figure 4-1)
1-port Fast Ethernet 2-port channelized T1/ISDN PRI network module (NM-1FE2CT1) (see
Figure 4-2)
C H A P T E R
Cisco Network Modules Hardware Installation Guide
4
Table 1-6 on page 1-16.
4-1