Cisco CISCO2650 - 2650 Router Hardware Installation Manual page 365

Connecting Cisco Network Admission Control
Network Modules
This chapter describes Cisco Network Admission Control (NAC)- network modules for Cisco access
routers, and contains the following sections:
•
•
•
•
To determine whether your Cisco router supports a specific network module, see
Tip
Cisco NAC Network Modules
Cisco NAC network modules allow network administrators to authenticate, authorize, evaluate, and
remediate wired, wireless, and remote users and their machines before allowing users onto a network.
The NAC module identifies whether networked devices, such as laptops, desktops, and corporate assets
are compliant with a network's security policies, and it addresses vulnerabilities before permitting
access to the network.
The Cisco NAC network module ships from the factory with the following hardware preinstalled.
See the Cisco NAC network module data sheet for supported Cisco Internet Operating System (IOS)
Note
version information, http://www.cisco.com/en/US/products/ps6128/products_data_sheets_list.html.
Model
NME-NAC-K9
OL-2485-20
Cisco NAC Network Modules, page 34-21
Connecting NAC Network Modules, page 34-23
Online Insertion and Removal of Cisco NAC Network Modules, page 34-24
Related Documents, page 34-27
C H A P T E R
Hard Disk Memory
80 GB 512 MB
Cisco Network Modules Hardware Installation Guide
34
Table 1-6 on page
CompactFlash
64 MB
34-21
1-16.