Cisco CISCO2650 - 2650 Router Hardware Installation Manual page 168

Adding 6-Port MICA Modules to a Digital Modem Network Module
Figure 9-8
Reinstalling the Digital Modem Network Module
When you finish installing MICA modules, replace the digital modem network module in the router
chassis, following these steps:
Align the network module with the guides in the chassis and slide it gently into the slot.
Step 1
Push the module into place until you feel its edge connector mate securely with the connector on the
Step 2
motherboard.
Cisco Network Modules Hardware Installation Guide
9-10
Rocking a 6-Port MICA Module Downward
Chapter 9 Connecting Digital Modem Network Modules
OL-2485-20