Network Interface Modules And Service Modules; Cisco Ucs E-Series Server Modules - Cisco 4451 ISR Hardware Installation Manual

Hardware Features of Cisco 4000 Series ISRs
•
•
Internal Slots
•
•
•
Warning Only trained and qualified personnel should be allowed to install, replace, or service
this equipment. Statement 1030
Warning This equipment must be installed and maintained by service personnel as defined by AS/NZS
3260. Incorrectly connecting this equipment to a general-purpose outlet could be hazardous. The
telecommunications lines must be disconnected 1) before unplugging the main power connector
or 2) while the housing is open, or both. Statement 1043
Note
See the

Network Interface Modules and Service Modules

To install NIMs and SM-Xs on the router chassis, see the
Cisco 4000 Series ISRs" section on page 6-29.

Cisco UCS E-Series Server Modules

Cisco UCS E-Series Servers (E-Series Servers) are the next generation of Cisco UCS Express servers.
E-Series Servers are a family of size-, weight-, and power-efficient blade servers that are housed within
the Generation 2 Cisco Integrated Services Routers (ISR G2) and Cisco 4000 Series Integrated Services
Router. These servers provide a general-purpose compute platform for branch-office applications
deployed either as bare-metal on operating systems, such as Microsoft Windows or Linux; or as virtual
machines on hypervisors, such as VMware vSphere Hypervisor™, Microsoft Hyper-V, or Citrix
XenServer.
Hardware Installation Guide for the Cisco 4000 Series Integrated Services Router
1-34
Cisco UCS E-Series Server Modules, page 1-34
Solid State Drives, page 1-35
Packet Voice Digital Signal Processor Modules, page 1-35
Memory, page 1-36
System Flash, page 1-35
See the Overview of Cisco Network Modules and Service Modules for Cisco Access Routers
document for general information and single- and double-wide slot numbering.
See the "Install and Remove NIMs and SM-Xs on Cisco 4000 Series ISRs" section on page 6-29
instructions that describe how to install SM-Xs and NIMs in the router.
See the Overview of Cisco Interface Cards for Cisco Access Routers
information.
See the Installing Cisco Interface Cards in Cisco Access Routers
describe how to install legacy interface cards in the router.
router product page at cisco.com for a list of supported network modules and interface cards.
Chapter 1 Overview of Cisco 4000 Series ISRs
for general interface card
document, for instructions that
"Install and Remove NIMs and SM-Xs on
for
OL-32185-02