Cisco CISCO2650 - 2650 Router Hardware Installation Manual page 248

CE Network Module LEDs
Figure 19-4 Connecting a CE Network Module with SCSI Controller Expansion Module to an External
CE Network Module LEDs
All CE network modules have an enable (EN) LED. This LED indicates that the module has passed its
self-tests and is available to the router.
CE network modules also display an additional power (PWR) LED and a CompactFlash (CF) LED on
the faceplate, and two additional LEDs for the Fast Ethernet port. (See
Figure 19-5 CE Network Module LEDs
DISK
NM-CE-BP
PWR
Table 19-1 Content Engine Network Modules for Caching and Content Delivery LEDs
LED
ACT
CF
Cisco Network Modules Hardware Installation Guide
19-4
Chapter 19
Cisco Storage Array
NM-CE-BP
DISK
LINK ACT
EN
PWR
FastEthernet 0
VHDCI
connector
on I/O module
LINK ACT
DISK
LINK ACT
EN
PWR
FastEthernet 0
EN
Meaning
There is activity on the Fast Ethernet connection.
The compact flash module is active.
Connecting Content Engine Network Modules for Caching and Content Delivery
CF
Figure 19-5 and Table 19-1.)
CF
CF
OL-2485-20