Subscriber Unit - Cisco CISCO2650 - 2650 Router Hardware Installation Manual

Network modules installation guide
Table of Contents

Advertisement

Related Documents
Table 15-1 Wireless Multipoint Network Module LEDs (continued)
LED
CARRIER
OUT OF SERVICE
MINOR ALARM
MAJOR ALARM
Related Documents
For additional information, see the following documents.

Subscriber Unit

Headend
Cisco Network Modules Hardware Installation Guide
15-4
Meaning
Indicates the state of the radio link. Green means that the radio link is
synchronized and the line protocol is up. Yellow indicates loss of link
synchronization.
Yellow means that the radio link is still up, but not available for use (typically
in a test or loopback mode).
Yellow means that the link is degraded and may need maintenance action, or
one or more user-defined event thresholds have been exceeded.
The link is down.
Multipoint Wireless Support for the Cisco 2600 and 3600 Series Routers feature document
Multipoint Support for the Cisco uBR7200 Series Universal Broadband Router feature document
Cisco uBR7200 Series Multipoint Wireless Modem Card and Subsystem Installation
Cisco Multipoint Headend Wireless Transverter Duplexer Replacement Instructions
Cisco Multipoint Headend Power Feed Panel Replacement Instructions
Cisco Multipoint Headend Wireless Transverter Replacement Instructions
Cisco Wireless Transverter Hail Shield Installation Instructions
Chapter 15
Connecting Wireless Multipoint Network Modules
OL-2485-20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents